Step by step method to make rear sleeper of Hero Glamour bike
- Get link
- X
- Other Apps
Indruction
Hello friends, welcome to Rajesh Technical Blog
Today I will tell you how to make or repair the rear shock absorber of Hero Glamour bike step by step. This simple method will help you check, clean, and fit the rear suspension system easily at home.
Step 1: Remove the Seat and Side Cover
First, remove the seat and side panel of your Hero Glamour. This gives access to the top nut of the rear shock absorber.
Step 2: Loosen the Top Bolt
Use a proper wrench to loosen the top bolt. Make sure the bike is on the main stand for safety and stability.
Step 3: Remove the Lower Bolt
Now remove the lower bolt of the shock absorber carefully. Hold the shock with one hand to avoid sudden movement.
Step 4: Check the Shock Condition
Inspect the shock absorber for oil leakage, spring damage, or weak damping. If it is leaking or very loose, it needs repair or replacement.
Step 5: Clean and Refit
Clean the shock with a dry cloth. Refit it back in the same position by tightening the bottom bolt first and then the top bolt firmly.
Step 6: Test the Bike
After refitting, press the seat or bounce the bike to test the suspension movement. It should move smoothly without noise.
Final Words
If your rear shock absorber is still not performing well, visit a Hero authorized service center. Regular maintenance helps keep your Hero Glamour sm
ooth and comfortable on every ride.2025/11/how-to-check-cdi-of-splendor-plus-bike
Thanks for visiting Rajesh Technical Blog. Stay tuned for more bike repair tips and guides!
📲 Join us on Social Media
- Get link
- X
- Other Apps
Comments
Post a Comment