Why Does the Battery of BS6 Bike Go Down? Full Explanation and Solution – Rajesh Technical Blog

Indruction 

Why Does the Battery of BS6 Bike Go Down? Full Explanation and Solution – Rajesh Technical Blog

Welcome to Rajesh Technical Blog. Today we will discuss one of the most common problems faced by many riders – the battery of BS6 bikes going down even after regular usage. Many riders get confused when the self-start doesn’t work or the horn sounds weak. So, let’s understand why it happens and how to fix it permanently.

1. Understanding the BS6 System

The BS6 (Bharat Stage VI) system is designed to reduce pollution. To achieve this, companies added advanced fuel-injection systems, oxygen sensors, ECUs (Electronic Control Units), and catalytic converters. All these electronic components depend directly on the bike’s battery. That means, even when the engine is off, some systems continue to draw a small amount of current, which can slowly drain the battery.

2. Common Reasons Why BS6 Bike Battery Goes Down

• Irregular Riding: If the bike is not used for several days, the battery slowly discharges because the self-charging alternator doesn’t get time to recharge it.
• Weak Alternator or Rectifier: The alternator generates current when the engine runs. If it becomes weak or the rectifier-regulator fails, the battery won’t charge properly.
• Excessive Electrical Load: Installing high-power horns, extra lights, or mobile chargers can cause the battery to drain faster than normal.
• Faulty Wiring: A damaged wire or loose terminal can cause a constant power leak even when the ignition is off.
• Old Battery: Most bike batteries have a lifespan of 2 to 3 years. After that, they lose their ability to hold charge properly.

3. Signs That Your BS6 Battery Is Weak

• The self-start button doesn’t work or needs multiple presses.
• The headlight glows dim at low RPM.
• The horn sounds weak or stops working.
• Bike stops suddenly while idling.
• ECU warning light or check-engine light flickers.

4. Step-by-Step Solution to Fix the Problem

Follow these steps to keep your bike battery healthy and avoid frequent discharging issues:

1. Step 1 – Check Battery Terminals: Make sure the terminals are tight and clean. Apply petroleum jelly to avoid corrosion.
2. Step 2 – Start the Bike Daily: Even if you don’t ride, start the engine for 5–10 minutes every day. This helps recharge the battery naturally.
3. Step 3 – Avoid Overload: Don’t install unnecessary accessories like powerful horns, LED strips, or fog lamps unless your bike’s alternator supports it.
4. Step 4 – Check Voltage: Use a multimeter to test battery voltage. A healthy battery should show around 12.5 to 13 volts when the bike is off, and 13.5 to 14.5 volts when the engine is running.
5. Step 5 – Use a Smart Charger: If your bike stays unused for weeks, use a trickle charger or smart charger to maintain battery health.
6. Step 6 – Replace Weak Battery: If the battery is more than 3 years old or fails to hold charge, it’s better to replace it with a new one from an authorized brand like Exide, Amaron, or SF Sonic.

5. Expert Tips from Rajesh Technical Blog

• Always turn off the ignition and headlight when the engine is off.
• Don’t press the self-start button continuously for more than 5 seconds.
• Use the kick start once a week to2025/11/how-to-tighten-honda-sp-shine-drop reduce battery stress.
• Check the alternator output once every 6 months.
• Keep your bike covered and away from direct rain or sun — moisture can affect wiring and cause power leakage.

Conclusion

BS6 bikes are technically advanced but require proper care of their electrical system. If your BS6 bike battery keeps going down, don’t panic. Just follow the maintenance steps mentioned above and check the charging system regularly. With little care, your bike will always start smoothly and run efficiently.

Keep visiting Rajesh Technical Blog for more useful technical tips and bike maintenance guides!

---

📲 Join us on Social Media

• Facebook
• Instagram
• Twitter
• Telegram