How to Set Engine Gear of BS4 Splendor Plus Bike: A Comprehensive Guide
Hello friends, welcome to Rajesh Technical Blog, where we dive deep into all things related to bike repairs and maintenance. Today, we are going to discuss a very important topic for all the Hero Splendor Plus bike owners out there—how to set the engine gear of your BS4 Splendor Plus bike.
If you're someone who enjoys the ride but faces challenges with shifting gears smoothly or you're new to bike maintenance, this guide will help you understand how to set the engine gear properly. The BS4 version of the Hero Splendor Plus is one of the most reliable and fuel-efficient bikes on the market. However, like all motorcycles, it requires periodic maintenance to keep it running smoothly.
Why Is Gear Setting Important for Your Bike?
Before we get into the step-by-step process, let’s first understand why gear setting is crucial for your bike’s performance. The gear system plays a vital role in controlling the power transmission from the engine to the wheels, which helps in smooth acceleration and deceleration. Incorrect gear setting can lead to a variety of problems, including:
Slipping gears that cause irregular acceleration.
Stiff or jammed gears that make it hard to shift while riding.
Increased engine wear if the bike runs in the wrong gear.
So, setting your engine gear properly ensures smooth operation, better control, and longevity of the bike’s engine and transmission.
Tools You Will Need
Before we dive into the procedure, make sure you have the following tools ready:
1. Wrench or Spanner (appropriate size for your bike)
2. Screwdriver (flathead or Phillips, depending on your bike model
3. Bike Stand or a Helper (to lift the bike for easier gear setting)
4. Grease (for lubricating parts during reassembly)
5. Torque Wrench (to ensure that parts are tightened correctly)
Step-by-Step Process to Set Engine Gear of BS4 Splendor Plus
Now, let’s break down the process into easy-to-follow steps:
1. Preparation: Park Your Bike and Make Sure It’s Stable
Start by parking your Hero Splendor Plus on a flat surface. Ensure that your bike is stable and doesn’t wobble when you work on it. If possible, use a bike stand or get help from someone to hold the bike while you work. This will prevent the bike from tipping over.
2. Check the Current Gear Setting
Before adjusting the gear, it’s essential to assess the current setting of your bike’s engine gear. You can do this by shifting through all the gears (from 1st to 4th) and observing the behavior. The gear should shift smoothly without any grinding noise, and the bike should not struggle or stall.
If the gears are too tight or shifting roughly, it’s a sign that the gear setting needs adjustment.
If the bike frequently slips out of gear or you can’t get it into a particular gear, that’s another indicator.
3. Locate the Gear Adjuster Screw
For the BS4 Splendor Plus, the gear adjuster screw is usually located near the gear lever or footrest. This screw is used to fine-tune the gear lever’s position, making it easier to engage the gears.
Tip: If the gear lever feels too high or too low, you can adjust it using the gear adjuster screw to get the perfect position for your foot.
4. Adjust the Gear Lever Position
To ensure that the gear lever is positioned correctly:
Use a wrench or spanner to loosen the lock nut of the gear adjuster screw.
Turn the screw clockwise or counterclockwise to raise or lower the gear lever.
The ideal position of the gear lever should allow you to easily shift gears with your foot without feeling strained.
After adjusting, tighten the lock nut again to secure the position.
5. Adjust the Gear Cable Tension
Next, check the tension of the gear cable. A loose or tight gear cable can cause improper gear shifting, leading to discomfort while riding.
The gear cable is connected to the gear lever at one end and the gear mechanism at the other end.
To adjust the tension, you can either tighten or loosen the cable using the adjustment barrel. Turning the barrel clockwise will tighten the cable, while turning it counterclockwise will loosen it.
Proper Tension: The gear cable should not be too loose, as it will cause delayed shifting. On the other hand, if it's too tight, it can lead to difficulty in shifting. Aim for a balanced tension where the gear lever moves smoothly but doesn’t feel too slack.
6. Inspect the Gear Mechanism at the Rear
Move to the rear of the bike and inspect the gear mechanism. Ensure that the linkage and the gear system components are properly aligned and functioning. If any part of the mechanism is loose or misaligned, it can affect your bike's shifting ability.
Lubricate the gear mechanism lightly with grease to ensure smooth operation and prevent wear.
Tighten any loose bolts or screws that you find.
7. Test the Gear Shifting
Now that the adjustments are done, it’s time to test the bike. Start the engine and shift through all the gears, from 1st to 4th. Pay attention to how smoothly the gears engage. The shift should be smooth, with no resistance or grinding noise.
Tip: If you notice that the bike struggles to shift into a particular gear or if the gear lever feels too loose or tight, you may need to make slight adjustments to the gear cable tension or the gear adjuster screw.
8. Test Ride Your Bike
Once you’re satisfied with the gear setting while the bike is stationary, take the bike for a short test ride. Shift through all the gears as you ride, checking for smooth transitions and ensuring that the bike accelerates smoothly in each gear.
Important: If you still feel any issues with the shifting, repeat the adjustments until everything feels just right.
Common Gear Issues and How to Fix Them
Sometimes, even after setting the engine gear properly, you may face issues. Here are some common problems and how to solve them:
1. Stiff or Jammed Gears
Cause: Incorrect cable tension or misaligned gear linkage.
Solution: Recheck the cable tension and ensure that the gear mechanism is properly lubricated.
2. Slipping Gears
Cause: Worn-out gear parts or loose gear mechanism.
Solution: Inspect the gear linkage and tighten any loose parts. If parts are worn out, replace them.
3. Grinding Noise While Shifting
Cause: The gear teeth may be damaged, or the clutch may not be disengaging properly.
Solution: Inspect the clutch mechanism and ensure that the gear teeth are not damaged. Lubricate the mechanism as needed.
4. Difficulty in Engaging Gears
Cause: Incorrect gear cable tension or worn-out clutch cable.
Solution: Adjust the cable tension and replace the clutch cable if needed.
Conclusion
Setting the engine gear of your BS4 Hero Splendor Plus may seem like a challenging task, but with the right tools and some patience, you can do it yourself. Regular gear maintenance is crucial for your bike’s smooth performance, and the steps outlined in this guide will help you achieve just that.
By ensuring that the gear lever is correctly adjusted, the cable tension is ideal, and the rear mechanism is functioning properly, you’ll enjoy smoother rides and avoid unnecessary wear and tear on your engine. So, the next time your gear system feels off, you’ll know exactly what to do!2025/10/bs4-returns-game-changer-for-bike
Stay tuned for more bike repair and maintenance tips right here on Rajesh Technical Blog. Happy riding!
📲 Join us on Social Media
Comments
Post a Comment